VW Aircooled Works - Web Shop
VW Aircooled Works -
VW Aircooled Works Shop.
Products specially designed for VW camper vans.

For all the detailed information on each product please browse our website.  All our products include postage and packaging to main land UK. For dispatch outside mainland UK please contact us before purchasing for a quote.





Standard Engine Bay fire suppression System
Automatic clean gas engine bay fire suppression system. Designed for a splitscreen, Bay and aircooled T25. The system includes all fitting components along with full instructions.
Price: £235.00
Barndoor Engine bay fire suppression system
Automated clean gas extinguisher suitable for a barndoor camper-van engine bay. Includes all fitting components along with full instructions.
Price: £285.00
Deluxe Audible Discharge Alarm
52mm VDO style alarm gauge, is an optional upgrade which gives an audible alarm if the fire system is activated. It can be used in conjunction with both the standard and barndoor fire suppression systems. Full fitting kit and instructions included.
Price: £75.00
Fuel cut-off solenoid
The solenoid can either be a stand alone install or ideally wired via the extinguisher so shutting off fuel if the extinguisher activates. The unit has been pre-assembled including tail fittings that have been secured using biofuel resistant thread sealant (std set up would use 6mm inlet and 6mm outlet, other options for 8mm tank outlets and/or bigger carbs are available below). The filter is replaceable and the ceramic filter and “O” ring kit can be purchased from VW Aircooled Works. This solenoid does away with the nasty plastic filters that are prone to cracking.
Price: £85.00
Solenoid tails options:
Solenoid Replacement Fuel Filter
The fuel tank cut off solenoid has a electromagnet that removes metallic impurities and a 20um ceramic filter which removes non metallic impurities. This filter require changing about every three years.
Price: £8.00
100% Biofuel 'Fit and Forget' Kit - Single Carb
Designed for a standard 6mm single carb aircooled engine. The kit included 1.75 metres fuel hose, clips kunifer hard line and a fuel filter.
Price: £47.50
100% Biofuel 'Fit and Forget' Kit - Twin Carb
Designed for a standard 6mm twin carb aircooled engine. The kit included 3.75 metres fuel hose, clips, kunifer hard line and a fuel filter.
Price: £82.50
100% Biofuel 'Fit and Forget' Kit - 6mm Tank & Pump - 8mm Twin Carbs
Designed for aircooled engine running a 6mm fuel tank and fuel pump, and 8mm twin carbs. The kit includes 1.75m x 5.6mm bio-fuel hose. 2.0m x 7.3mm bio-fuel hose Along with kunifer hard line, reducers fuel filter and fuel clips.
Price: £87.50
100% Biofuel 'Fit and Forget' Kit - 6mm Fuel Tank / 8mm Fuel Pump & Twin Carbs
Designed for aircooled engine running a 6mm fuel tank, 8mm fuel pump, and 8mm twin carbs. The kit includes 0.35m x 5.6mm bio-fuel hose. 3.75m x 7.3mm bio-fuel hose Along with 8mm kunifer hard line, reducers fuel filter and fuel clips.
Price: £97.50
100% Biofuel 'Fit and Forget' Kit - 8mm Fuel Tank, Fuel Pump & Twin Carbs
Designed for aircooled engine running an 8mm fuel tank, 8mm fuel pump, and 8mm twin carbs. The kit includes 3.75m x 7.3mm bio-fuel hose Along with 8mm kunifer hard line, T piece, fuel filter and fuel clips.
Price: £97.50
100% Biofuel 'Fit and Forget' Kit - Fuel Injection engine
Designed specifically for a fuel injection engines This kit contains 0.08m x 11.5mm hose 1.60m x 7.3mm hose Fuel clips and box filter. Everything is in the kit that is needed to change all the fuel lines to modern bio-fuel hose.
Price: £70.00
Early Bay Fuel Filler hose. Ethanol Resistant
This ethanol resistant fuel filler hose is the correct diameter and length to fit perfectly to the tank and fuel filler neck of an early bay. The kit comes with the hose and clips.
Price: £45.00
Fuel Tank Treatment Kit
A two part tank treatment kit designed to clean and remove rust from the fuel tank. Once clean the slosh treatment is used to coat the tank with an ethanol resistant coat.
Price: £45.00
E10% Fuel Line Kit for Single Carb Engines
Designed for standard 6mm single carb engines. The fuel line is suitable for petrol containing upto 10% ethanol. The kit included 1.5m fuel hose, clips and a fuel filter.
Price: £25.00
E10% fuel line kit for twin carb engines
Designed for standard 6mm twin carb engines The fuel line is suitable for petrol containing upto 10% ethanol. The kit included 3.5 metres fuel hose, clips and a fuel filter.
Price: £36.00
6mm Kunifer Hard line
A shaped piece of kunifer hard line designed to go through the tinware instead of your fuel hose. If fuel hose goes through the tinware it is liable to chaff due to the vibrations of the engine. By using hard line this risk is elevated. The hard line is suitable for upto 100% biofuel.
Price: £7.50
8mm Kunifer Hard line
A shaped piece of 8mm kunifer hard line designed to go through the tinware instead of your fuel hose. If fuel hose goes through the tinware it is liable to chaff due to the vibrations of the engine. By using hard line this risk is elevated. The hard line is suitable for upto 100% biofuel. To be used on engine that have non standard 8mm outlets on the fuel tank .
Price: £10.00
Fuel T Piece Reducers
The fuel T piece's are suitable for use in bio-fuel and are ethanol resistant so will not be effected by the use of modern petrol. Please use the drop down box box to select the correct T piece size.
Price: £5.00
Fuel T piece size:
Straigh 6 - 8mm Reducer
This top quality straight reducer can be used when changing from 8mm - 6mm / 6mm - 8mm fuel hose. This is the correct diameter to give a perfect fit to our fuel hose.
Price: £2.00
Battery Isolator Kit
Prevent your van being driven away when left parked. This kit includes the isolator, stainless steel mounting plate, battery cables and terminals and instruction. along with delivery to mainland uk.
Price: £34.00



Website Builder provided by  Vistaprint